New hypertherm powermax 1650 plasma cutter

UpUp


Subject: New hypertherm powermax 1650 plasma cutter
For More information on this item, contact us at:
NEW! Hypertherm PowerMax 1650 Plasma Cutter
**CALL ABOUT TRADE IN REBATES**
The Powermax1650 is the latest addition to
the Powermax G3 series of systems. With
advanced technologies in both power supply
and torch, Hypertherm G3 products cut faster, and more economically, than any system available anywhere today. Its Auto-voltage circuit provides automatic adjustment to any input voltage from 200 to 600 volts, 3-phase (CE 230 to 400 V 3-phase only). A state-of-the-art, microprocessor-driven architecture
assures optimum system reliability. Add to
100-amp, 16-kilowatt output provides
ample power for cutting heavy plate
Auto-voltage input sensing allows you
to run on voltages from 200 to 600
volts, 3-phase, with no rewiring.
CNC/Robotic machine interface is
standard on all units, allowing for
New Boost Conditioner circuit compensates for input voltage variation.
Advanced digitally-controlled inverter
design delivers continuously adjustable constant current output, from 30 to 100
amps, producing high-quality cuts over
a wide range of metal thicknesses.
An active, electronic pilot-arc controller
grating preserves consumable life.
A new gouging setting allows for longer
arc lengths and easier operation,
plus a metal removal rate in excess
of 22 pounds per hour (10 kg).
Wheels are standard on the Powermax1650 and provide improved mobility over
Back-lit LED's clearly convey all the information necessary to monitor the
system status, including an easily
readable and understandable air
Work cable with clamp 15 feet (4.5 m)
200 – 600 V, 3-PH, 50/60 Hz, CSA
230 – 400 V, 3-PH, 50/60 Hz, CE
200/208/230/240/400/480/600 V, 3-PH:
Duty cycle @40° C (104° F) @ 100amps
Output for 100% duty @ 40° C (104° F) @ 100amps
Dimensions 26.4" D; 16.8" W; 25.8" H
Weight with torch 128 lbs (58 kg)
Gas supply Clean, dry, oil-free air or nitrogen
Flow rate 550 scfh; 9.2 cfm (260 l/min) at 90 psi (6.2 bar)
75 psi (5.1 bar) flowing, 25' leads
80 psi (5.4 bar) flowing, 50' leads
If you have questions, call . Information about our company is also available on our website www.weilerdirect.com.