Miller xmt 350 xr-edge mig runner # 907234

UpUp


Subject: Miller xmt 350 xr-edge mig runner # 907234
YOUR SOURCE FOR WELDING SUPPLIES
ARCAIR SLICE PACKS - LENCO SPOT WELDERS
________________________________________
Miller XMT 350 XR-Edge Mig Runner Pkg #907234
The image “http://www.brwelder.com/images/MILLER%20XMT%20350%20CVCC%20MIG%20RUN%20MED.jpg cannot be displayed, because it contains errors.
The XMT-350 CC/CV multi-process welder with the XR-Edge gun control, provide the ultimate system for feeding aluminum wire. The push-pull type wire feed system virtually eliminates burnbacks, wire stubbing or erratic feeding that can occur with less specialized welding systems.
* MIG (GMAW)/Pulsed MIG* (GMAW-P)
* TIG (GTAW) /Pulsed TIG* (GTAW-P)
* Air Carbon Arc (CAC-A) Cutting and Gouging
* With optional controls only
* Heavy Industrial Applications
* Truck and Trailer Manufacturing
* Input Power-Requires 3- or 1-phase power
* Rated Output 350A at 34VDC, 60% Duty Cycle, 3ph, 300A at 32VDC, 60% Duty Cycle, 1ph
* Output Power Range - 10 - 38 V, 5 - 425 A
* Auto-Line Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power. Learn more about Auto-Line on the XMT 350
* 350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.
* Tweco-style output connectors provided standard on the XMT-350 VS. Eliminates the need for cable adapters at the construction site.
* Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.
* Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.
* Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
* Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle (CC/CV models only).
* Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.
* Process selector switch reduces the number of control setup combinations without reducing any features.
* Large, dual digital meters are easy to view and presettable to ease setting weld output.
* Pulsed MIG capabilities with optional Optima control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission.
* Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
* Optional gas solenoid for TIG welding.
* Wind Tunnel Technology Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
* LVC Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
* Fan-On-Demand Internal power source cooling system that only works when needed, keeping internal components cleaner.
* Adaptive Hot Start for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.
* Lift-Arc Simply touch the tungsten to the work piece…lift…and the arc is initiated instantly and automatically without the use of high frequency.
* XMT 350 CC/CV power source
* 30 ft (9 m) XR-Edge gun (air-cooled)
* .035 and .047 in drive roll kit
* Regulator/flow gauge with gas hose
* MIGRunner with cylinder rack
* Bottom tray will hold optional Coolmate 3 (sold seperately)
________________________________________________________________
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
FAX
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to :
we only accept wire transfers. Please call for our banking info.
Personal checks take 2 weeks to clear