Hypertherm 087009 powermax 1250, 200-600V w/50' torch

UpUp


Subject: Hypertherm 087009 powermax 1250, 200-600V w/50' torch
Scott-Gross Company, headquartered in Winchester, KY, was established in 1949 and is primarily known as a supplier of Industrial, medical, and specialty gases, bulk and cryogenic gases, dry ice, welding equipment and supplies, welder rental and repair, and propane exchange. Scott-Gross Company has retail stores located in Kentucky, Pennsylvania, Arkansas, Oklahoma, and Texas.
Hypertherm Powermax 1250 Plasma Cutter 200-600V Manual System with 50' Hand-Held Torch - 087009
High-Performance Portable Plasma Cutting System
Recommended Capacity: 7/8" (22 mm)
Maximum Capacity: 1 1/8" (29 mm)
Severance Capacity: 1 1/2" (38 mm)
Brand New Hypertherm Powermax 1250 Plasma Cutter 200-600V Manual System with 50' Hand-Held Torch - not refurbished, not rebuilt, not reconditioned. Genuine Hypertherm product - stock number 087009
Metal scrapping and dismantling
Industrial equipment manufacturing and repair
Truck and trailer manufacturing and repair
Input Voltages: 200 - 600 V, 1- or 3-PH, 50 - 60 Hz CSA
Input Current @ 12.0 kW Phase 1: 200/208/230/240/480 V, 1-PH: 70/70/60/58/31 A
Input Current @ 8.4 kW Phase 3: 200/208/230/240/400/480/600 V, 3-PH: 41/40/37/34/21/17/17 A
Duty Cycle @ 40° C (104° F): 60% @ 80 A, 230 - 600 V, 3-PH
Duty Cycle @ 40° C (104° F): 60% @ 80 A, 480 V, 1-PH
Duty Cycle @ 40° C (104° F): 50% @ 80 A, 240 V, 1-PH
Duty Cycle @ 40° C (104° F): 50% @ 80 A, 200 - 208 V, 3-PH
Duty Cycle @ 40° C (104° F): 40% @ 80 A, 200 - 208 V, 1-PH
Dimensions: D/23.1" W/10.65" H/19.6"
Gas Supply: Clean, dry, oil-free air or nitrogen
Flow Rate: 400 scfh; 6.7 cfm (189 1/min) at 90 psi (6.2 bar)
Flow Pressure: 70 psi (4.8 bar) flowing, 25' leads
Flow Pressure: 75 psi (5.1 bar) flowing, 50' leads
To see full specifications, visit http://www.hypertherm.com/languages/english/PDF/SB_PMX1250_%20860110_r7.pdf
Search our Store Inventory for the products listed below.
087001 / T80 Hand Torch Assembly, 25 ft Leads
087002 / T80 Hand Torch Assembly, 50 ft Leads
087047 / T80 Hand Torch Assembly, 75 ft Leads
087004 / T80M Machine Torch Assembly, 25 ft Leads
087006 / T80M Machine Torch Assembly, 50 ft Leads
087048 / T80M Machine Torch Assembly, 75 ft Leads
087003 / T80M Machine Torch Assembly, 15 ft Leads
087005 / T80M Machine Torch Assembly, 35 ft Leads
087029 / T80M Machine Torch Assembly, 15 ft Leads, 35mm / No Rack
087030 / T80M Machine Torch Assembly, 25 ft Leads, 35mm / No Rack
087032 / T80M Machine Torch Assembly, 35 ft Leads, 35mm / No Rack
087031 / T80M Machine Torch Assembly, 50 ft Leads, 35mm / No Rack
087054 / T80M Machine Torch Assembly, 75 ft Leads, 35mm / No Rack
011092 / Replacement Filter Element for Accessory Filter
027668 / Circle Cutting Guide Assembly
128145 / 50 ft (15 m) Work Cable with Clamp
023206 / CNC Interface Cable, 25 ft
128658 / Hand Heat Shield, Gouging
128650 / On/Off Pendant for Machine Torch, 25 ft
128651 / On/Off Pendant for Machine Torch, 50 ft
128652 / On/Off Pendant for Machine Torch, 75 ft
128888 / FineCut Kit, Powermax1000/1250/1650
127099 / Powermax 1000 System Cover
127102 / Circle Cutting Guide Assembly - Basic
120927 / Nozzle, 80A, Shielded
120930 / Shield, Machine Cutting
120980 / Nozzle, 80A, Unshielded Extended
220006 / Nozzle, 40A, Unshielded Extended
220007 / Nozzle, 60A, Unshielded Extended
120931 / Nozzle, 60A, Shielded
120932 / Nozzle, 40A, Shielded
220061 / Retaining Cap, Ohmic Contact
220327 / Swirl Ring, Hand, FineCut
220404 / Shield, Ohmic, FineCut