Up
|
HOME :www.coloradoequipmentbroker.com Cost New: Meter $4995 Power Sensor $3091 Total:$8086 HP/Agilent E4419A EMP Power Meter with 8482B Power Sensor Meter Still has current Calibration and comes with manual The HP/Agilent E4419A is a low-cost, high-performance, dual-channel, programmable power meter. It is fully compatible with the 8480 series of power sensors and the E-series of power sensors (except the E9320A Family). Depending upon which sensor is used, the E4419A can measure from -70 dBm to +44 dBm at frequencies from 100 kHz to 110 GHz. Designed for bench and automatic test equipment use (ATE), the E4419A makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements. The E4419A is a true dual-channel power meter, which means that you get two simultaneous power readings on the display. Fast measurement speed (up to 100 readings per second, over the GPIB, with E-series sensors) Speed improvement of x2 using the 8480 series power sensor (compared to 437B) No range-switching delays with 8480 series sensors, and only one fast-range switching point with E-series sensors High-resolution display with backlighting for a wide viewing angle of displayed data Save and recall of up to 10 instrument states GPIB connector for remote control of all functions Conformity to CE and CSA standards The HP/Agilent 8481B thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x series power meters, and provides extraordinary accuracy and stability. The 8481B power sensor also gives you extremely low SWR. A calibration port is included with the above power meter for calibration with the power sensor. This calibration eliminates the uncertainties due to temperature changes and the variance in making measurements with different meter/sensor combinations. |