Up
|
Delta 15-127R Ram Type Radial Drill Press - Reconditioned • Gives you machine tool capacity and performance combined with power tool adaptability and versatility. • Extra drilling capacity allows you to take the drill right to the work. Tilt it up to 45-degrees right or left, swivel the head 360-degrees for operations either on or off the table. • Built in jack shaft assembly provides 16 different speeds from 175 rpm to 8200 rpm. • 42" column for extra spindle nose to table capacity and a big 6" quill stroke with a ram travel of 17". • Head tilts a full 45-degrees right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle. Double locks on each side to securely lock head to prevent angle deviation under heavy loads. • Convenient controls for extra operating ease features a quill lock knob, two quill wear adjustment screws and an adjustable quill return spring. • Big cast-iron machined table has four T-slots and oil trough tapped to accommodate 1/2" pipe. Motor • 1/2 HP, 115/230V, single phase, 60 Hz. • Push button station, magnetic starter, transformer and 3-leg overload protection (LVC) Spindle Speed with 1725 RPM Motor • 175, 365, 380, 600, 695, 765, 1030, 1250, 1380, 1450, 2200, 2600, 2800, 4000, 4750, 8200 rpm • 90-degrees, 45-degrees left, vertical, 45-degrees right Column Diameter • Chuck to table: 24 3/16" max. • Max. dia. hole in steel: 3/8" • Max. dia. hole in cast-iron: 1/2" Thank you for your business. Visit our store here! |