8 in itw/woodworth 3-jaw power chuck a-6" back

UpUp


Subject: 8 in itw/woodworth 3-jaw power chuck a-6" back
http://www.industrialsurplus.com/images/islogo_lg.gif
8 In ITW/Woodworth 3-Jaw Power Chuck A-6" Back
ITW/Woodworth 8" Universal 3-Jaw Power Chuck
Serial No. W.O.#13-125951 New 1989
Universal ball-lok pull down compensating type chuck. For both external & internal chucking.
The compensating features of this chuck allows the chuck jaws to compensate for any eccentricity between the chucking diameter and the datum diameter. The centralizing device is usually an arbor, plug or center mounted on the face of the chuck. It then acts as the centralizing device which establishes the axis of rotation for the datum diameter in the work piece. The diameters being turned will then be concentric to the datum diameter.
Amount of Compensation: .060"
Maximum Draw-bar Pull: 8000 Lbs.
Maximum Operating Speed: 2500 RPM
Standard Bolt-on Master Jaws
Item # 12B-313 iammdna
All Items Subject to Prior Sale
Be Sure to Verify Specs & Condition Prior to Purchasing
CONTACT US: We are available to answer your calls and inquires, Monday thru Friday, 8am - 5pm, at , or you can email us at
http://www.industrialsurplus.com/images/building.jpg