Up
|
48" x 168" CINCINNATI Single Spindle Hydrotel Horizontal Milling Machine With Independent Motorized Dovetail Vertical Overarm Attachment And Swivel Head, S/N 58-410-R-841-1 (Originally Built 1959, Rebuilt By CINCINNATI MILACRON 1984) Spindle carrier vertical travel Maximum/Minimum distance, spindle center to table Maximum height, center of overarm spindle in horizontal position to table Maximum height, face of overarm spindle to table top Maximum distance, horizontal spindle to outer edge Maximum swivel of vertical overarm spindle Taper in vertical overarm spindle (16) Horizontal spindle speeds (8) Vertical overarm spindle speeds Longitudinal and vertical feed range Overall dimensions with overarm attachment Overall dimensions without overarm attachment #60 N.S.T. with #50 N.S.T adapter 416-1/2" L x 173-3/4" W x 179" H 416-1/2" L x 158-3/4" W x 179" H 5 H.P. independent motorized vertical overarm attachment with 360 degree swivel, #50 N.S.T, motorized travel, and separate pendant control Hand feed controls for longitudinal travel of table and vertical travel of spindle carrier Power rapid traverse for longitudinal travel of table and vertical travel of spindle carrier #DP-7 NEWALL three-axis digital readout Built-in auger-type chip conveyor Large quantity of set-up and tie-down tooling with steel storage cabinet 20 H.P. 3/60/220-440 volt RACINE hydraulic power unit 50 H.P. 3/60/220-440 volt horizontal spindle drive motor and electrical controls Machine is wired for 3/60/440 volt operation. (F.O.B. Truck, Wilmington, DE) |