Up
|
#116 GLEASON HYPOID SPIRAL BEVEL GEAR Hydraulic Double-Acting Chucking Mechanism Standard Double Path Feed Cam For Up & Down-Roll Roughing & Single Roll Roughing Later Generation Hydraulically Sssisted Brake Mechanism For Clamping Of Work-Spindle GLEASON Automatic Counter & Stop Full Complement Of Electrics (Motors/Controls) Self Contained Hydraulic System One Single Set-Up Of Change Gears For One Operation As Last Performed On The Machine. Operator's Manual, Parts List, Wiring & Hydraulic Diametral Pitch (Coarsest)............. 2 DP/(12.7-Module) Maximum Full Depth..................... 1"/(25.4mm) Cone Distance, Maximum (30-Degree Sprial Angle & 12" Diameter Cutter..... 9"/(230mm) Maximum Pitch Angle (Shafts @90-Deg)... 84 DEG 18' Minimum Pitch Angle (Shafts @90-Deg)... 5 DEG 42' Extreme Ratio (Shafts @90-Deg)......... 10 To 1 Operate w/"Formate" Gears.............. 2 to 1 10 to 1 ratio.......................... 18"/(460mm) 2 to 1 ratio........................... 16"/(406mm) 1 to 1 ratio........................... 12.75"/(324mm) Max Face Width (Depending On Cutter)... 2.75"/(78mm) Max./Min. Number of Teeth.............. 175 to 5 Work Spindle Taper Bore Dia.(Large End) 3.9"/(100mm) Taper (Per Rt.)........................ 39/64"/(1:20) Depth Of Taper......................... 6"/(150mm) Diameter Pf Hole Thru Spindle.......... 3.06"/(78mm) Diameter Of Spindle Nose............... 5.5"/(140mm) Cutter Diameters Utilized.............. 6",7",9" & 12" Cutter Diameters Utilized.............. (150,190,230,305mm) Workhead Max Offset Above Center....... 4.5"/(114mm) Workhead Maximum Offset Below Center... 4.5"/(114mm) Maximum Distance From Machine Center To Nose Of Spindle..................... 13.5/(343mm) Minimum Distance From Machine Center To Nose Of Spindle..................... 2.5"/(63mm) Cutter Speeds.......................... 20 To 115 RPM Feeds (Seconds Per Tooth).............. 9 To 80 SECONDS Feed Motor, Horsepower................. 5 HP 1800 RPM Hydraulic Motor, Horsepower............ .75 HP 1800 RPM Coolant Motor, Horsepower.............. .5 HP 3600 RPM Floor Space............................ 75" x 114"/(1905x2896mm) Machine Net Weight..................... 23,700 Lbs./(10,773 kGs) NOTES: Suitable For The Rough-Cutting Of Automotive-Type Hypoid & Spiral Bevel Pinions Up To 10:1 Ratio, 9" (228.6mm) Cone Distance & A Maximum of 2 DP (Module 12.7) PRICE: F.O.B. CINCINNATI, OHIO........ $29,500.00 Condition: good to excellent, machine is missing nut for draw-bar and right-hand overam bar All machines/equipment subject to prior sale. |