Valby CH140 woodchipper wood 15-40 hp manual feed tool


Subject: Valby CH140 woodchipper wood 15-40 hp manual feed tool
Increase Sales by 18% and double your hits - Vendio Gallery
Mounting: 3-Point hitch CAT 1 or 2
Tractor PTO Speed 540-1000 RPM
Chipping Rotor Diameter: 26 3/8"
Weight 220 Lbs weight of rotor
Knives Two 8 3/4" x 3 7/8" full size knives.
Disk Bearings Spherical roller
In-feed Capacity 6 ΒΌ" capacity
Discharge: Adjustable 360 Degrees
The low feeding point ensures effortless feeding of the chipper. The operator can stand with a straight back. The chipper stands by itself on the ground and is easy to hook up or remove from the tractor.
The Valby chippers do not have any knife motion toward the operator. This reduces risk of material flying back through the feed chute. The discharge height is under 4 feet so the chips fly out below eye level. To accomplish safe operation in various wind directions, the Valby chippers discharge direction is adjustable 360 degrees. An adjustable deflector bonnet enables placing the chips near or far. The chipper feeds the material smoothly and does not jerk it from the operator's hands. The knives are counter sunk into the disk for safety.>
The upper housing of the chipper opens up for easy access to the knives. The knives can be sharpened about 50 times before replacement. The changing of the knives takes about 10 minutes. The knives are easy to get to, and no special tools are needed for the change.
The feed chutes of the chipper are on a hinge, so the chute can be folded to the side for access to the anvil and knives. The feed chutes are detachable. One can hook up either feed chute option to an existing machine. drop feed where the knives pull in the material.
For fastest processing of this order, please use Vendio Checkout!
Click to view supersized image
Click to view supersized image
supersized) with Vendio Sales Manager.
Smart Services for Smart Sellers
Listing automation and FREE scheduled listings by Vendio.