Programmable saddle elbow & shape cutter for pipes


Subject: Programmable saddle elbow & shape cutter for pipes
Programmable Saddle, Elbow and Shape Cutter for Pipes from Cypress Welding Equipment Inc.
*This was bought from a company in Michigan. They paid $26,000 for it, and they used it for one job that lasted 2 months. They were then shut down by the bank, and their inventory was sold off. This cutter is in great condition.
*The Programmable SE-2 Pass Through Machine provides single or dual programming capabilities. The SE-2 has a single program for making Saddle Cuts, Offset Cuts, Laterals and Miters. This machine can also have an optional (selectable) program for cutting holes and shapes in pipes. Pipes from 4" (100 mm) to 14" (355 mm) can be chucked internally and pipes from 1" (25 mm) to 4" (100 mm) can be chucked using the pass through option. The SE-2 Machine is suitable for plasma and oxy-fuel cutting and eliminates the need to make templates or layout complex cuts.
~Cutting Diameter: Pass through 1" to 4" (25 mm to 100 mm) O.D.
~Rotation Speed: Min. 0.3 rpm, Max. 3.7 rpm
~Input Power: 120/50-60/1 or 220/50-60/1
~Net Weight: 345 lbs. (157 kg)
4. Miter Cuts, Single Cut Piece Elbow
Shape Program: (Optional) Any arbitrary shape
~Capacity: Max Weight 375 lbs. (170 kg) pass through, when supported
~Short sections of pipe p to 14" (355 mm) dia. can be mounted off the chuck face.
~Max Overhung Length: 15" (383 mm)
~Max Overhung Weight: 150 lbs. (68 kg)
The machine is designed to sit on a work table. Method of cutting can be oxy-fuel or plasma. Picture 3 shows item originally set up.
Visit for more information about the manufacturing company.