Polamco wr 50/2 radial drill


Subject: Polamco wr 50/2 radial drill
Length of Arm: 6'
Column Diameter: 17-3/4"
Vertical Adjustment of Arm: 30.7"
Horizontal Travel of Head on Arm: 63"
Working Surface of Base: 81" x 35"
Working Height of Base: 8.3"
Column Rotation: 360 Degrees
Maximum Distance Between Spindle and Column: 76"
Maximum Distance Under Spindle: 70.9"
Minimum Distance Under Spindle: 26.4"
(36) Spindle Speeds: 30 - 1700 RPM
(18) Spindle Feeds: .0012" - .047" per Revolution
Spindle Diameter: 3.4"
Spindle Travel: 13.8"; Spindle Taper: #5 Morse Taper
Drilling Capacity (in Steel): 2.13"; (in Cast): 2.75"
Tapping Capacity (in Steel): 2"
Power Elevation; Power Clamping
Drill Table (36" x 60" x 24")
Automatic Depth Stop
Automatic Lubrication System
6 HP AC Main (Spindle) Drive Motor; Elevation Motor
Electrical Controls
Approximate Overall Dimensions: 120" L-R x 42" F-B x 120" H
Approximate Weight: 13,300 Lbs.
Serial Number: 921/14895 (New 1965)
P2 F.O.B. Elk Grove, IL - $ 3,500.00
Email us at
Call our Sales Staff at
Prices do not include any federal, state or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PMS with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PMS, be added to the quoted purchase price and invoiced by PMS to Purchaser. The failure of PMS to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes.
Some machinery and equipment is located at Fortune 100 Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by PMS, all machinery and equipment uses 3 Phase power.
(outside US & Canada)