Up
|
Scale Patterns of Contact Reticles Total Length 20mm in 200 divisions, least count-0.1mm 9 Metric Screw Threads per mm : -0.25, 0.3, 0.35, 0.4, 0.45, 0.6, 0.75, 0.9 & 1mm 9 Screw Threads shown in inches TPI : -8,14,16,18,20,24,28 & 32 and 50. 10mm square divided into 0.5mm square 10mm radius scale numbered every mm, graduated each 0.5mm-180 degress protractor numbered every 10-degrees each division. 0.3" X 0.4" grid in 0.025" squares/Two horizontal scales 0.4" with 0.005" divisions, 20mm with 1/1mm divisions. Angle scale 0-degress to 90-degrees in 1-degree divisions. Radius scale 1 to 10mm. Nine circles 1/1mm to 3mm dia. 3 Horizontal scales : 20mm 1st scale 10-0-10 in 0.1mm division and 0-1 in 0.05mm, 2nd scale is 0-1/8" in 1/64". 90-degrees anle scale in 5-degrees division, 80-90-degrees in 0.1 degree. Arcs 0-10mm in 0.5mm, 0-1 in 0.1mm div. Angle scales 29, 55, 60 and 118-degrees. Left 10 circles 0.1 to 0.1mm div, right 10 circles from 0.005 to 1/64" dia. 43mm dia-Angle scale reads 0-90 degrees, graduated every degree, numbered every 5-degrees. Radius scale: reads 1/16" to 3/3 numbered 1/32". Millimeter scale: 10mm, graduated every 1/10, numbered every mm. Inch scale: 1/2" long, graduated every 0.005", numbered every 0.01". Circle scales: 4 scales 1/64",1/32" 3/64", 1/16", 5circles 0.01" to 0.05". Width scales: 7 sizes 1/64" to 1/14". MicroscopesINDIA is linked with OEMs in INDIA manufacturing thousands of Optical Instruments & Laboratory Equipment such as Microscopes, Projectors, Microtomes, Camera Accessories, Laboratory Glassware etc. These products are from the same factories which manufacture components & Instruments for world renowned companies and they are selling the same for even ten times the price of these. You can be sure about very good quality & services. The prices mentioned in US$ are just an approximation. kindly check the current conversion rate of Indian Rupees to your currency for the exact price. Taxes : There are no taxes for any international purchase. Although some items might take upto 7 days depending on the availability. A) Returns on Defective and/or Damaged items Authorization must be obtained before returning any item(s) and be on visible on the box or label it is being returned in. Items returned without Authorization will be refused and returned to the sender Items returned must be in like new condition with all original boxes, hardware, manuals & accessories. Defective or damaged items must be reported immediately within 5 days of receiving item. Any item to be returned for refund must be received within 7 days of receiving item. Our products carry a warranty of 1 year against any manufacturing defects. However electrical components such as bulbs etc. are not covered within this warranty. The item shall be repaired or replaced, depending upon the nature of fault within period. We would like resolve all the issues for your satisfaction so please do contact us before leaving a neutral or negative feedback. In case you choose to leave a negative feedback before either contacting us or allowing us to fix a possible error, we may take that as a conclusion of our business and ending of all obligations |