New us-400MU ice machine special marine design )

UpUp


Subject: New us-400MU ice machine special marine design )
NEW US-400MU ICE MACHINE SPECIAL MARINE DESIGN )!!!!RETAIL PRICE $ 7,999 SAVE $$$$$$$$$$!!!!!!!!
The US-400MU uses a stainless jacketed evaporator and operates on a continuos freezing cycle. Water is supplied to the evaporator from the water reservoir where the water level is controlled by a float valve. This valve also shuts off the water supply when the US-400MU is not running.....
When the US-400MU is running, a layer of ice forms on the interior surface of the evaporator. This ice is continuously removed by a slowly rotating auger. The auger carries the ice upward into the cavity formed by the toip bearing housing and the compression loop, where it is compressed to remove excess water. When the ice reaches the desired hardness it rotates within the cavity and is forced through a discharge port and compression nozzle are slightly restricted to further compress the ice and produce the desired hardness. As a formation of the ice continues , ice in the transport tube is pushed through the tube to the desired location (fish box, drink box, cooler,etc)up to 20 feets away vertically or horizontally.Asolid state control board controls the normal operation of the US-400MU and monitors gears motor torque. This control board will shut down the US-400MU when a torqu condition ocurs. US-400MU self contained or split system allows flexibility at time of installation.
160 lbs (73 kgs) Auger & Condensing Unit Combined
11 amps@60HZ 1PH 5.5 Amps@60HZ 1ph
20 amps fuse size 20 amps fuse size
Stainless Steel Auger, Evaporator , Top roller bearings
Low water safety circuit, High torque safety circuit.
400 lbs (181kg) of ice per day (24 hrs) cycle fresh or saltwater.
Freshwater or saltwater consumption :
1/4 " hose, 5psi minimum pressure
22.75"W (578mm) x 17'' H (432mm) x 22.75"L (578mm)
" ONE OF THE STRONGEST MARINE MACHINE IN THE WORLD "