Restaurant Supply Web Showroom
At Your Service
57.50" High 30" Wide 31" Depth
Professional Installation And Service Nationwide. Click To Learn More.
ICE-O-Matic Is The Best Ice Making Solution for:
The closer you inspect for benefits and quality the more ICE-O-Matic stands apart from the competition.
PURE ICE comes only from ICE-O-Matic.
PURE ICE is a built- in antimicrobial protection that prevents bacteria and slime fungus growth on the ice making surfaces for THE LIFE OF THE ICE MAKER.
ICE-O-Matic's optional water filtration system provides further protection against bad tastes, odors and scale formation.
ICE-O-Matic. Harvest Assist provides consistent production 24/7 for the life of the ICE maker. ICE is helped off of the evaporator freezing surface instead of relying solely on gravity. This method overpowers scale buildup. Your operating costs are reduced because Harvest Assist delivers ice faster, with less melting than any other system available.
115 volt Cube ICE Makers are very energy efficient machines that offer maximum ICE production with minimal kilowatts per hour and water usage. This results in reduction of operating cost over the life of the ice maker.
The Cuber evaporator uses electroless nickel plating on all evaporator plates. This hard coating resists the damaging effects of water and ice over an extended period of time.
GOOD TO KNOW: Kirby Certified Nickel-Safe Ice Machine Cleaner is specially designed to protect factory coatings and thoroughly remove all scale buildup that could prevent maximum production. Protect your investment. Get Kirby Certified Nickel- Safe Ice Machine Cleaner.
No side clearance required...ICE-O-Matic uses a minimum amount of space with an ultra-low profile. This is a FREE optional feature. It is ideal for tight-fitting places.
Rust-resistant ICE-O-Matic ICE Makers are constructed from rugged 300 series stainless steel on the inside and a combination of stainless steel and industrial-grade fingerprint- proof molding on the outside.
You get a strong 3 year parts and labor warranty on all components plus and additional 2 years parts warranty on the compressor.
Purchase an ICE-O-Matic water filter with our new ICE-O-Matic Cube ICE Maker, replace the water filter cartridge every 6 months, and the evaporator warranty is extended to 7 years - parts and labor (USA & Canada) Go to filter page.
MATCHING STAINLESS STEEL STORAGE BIN IS STATE OF THE ART CONSTRUCTION.
You get maximum ice preservation because of smart bin engineering. 1.5" to 3" of non CFC FOAM is forced under pressure to surround the polyethylene bin liner. This forms a perfect wall-to-wall bond insuring maximum ice preservation.
Our Poly bin liner is sanitary and easy to clean while also resisting scratches and scuffs from ice scoops. Impact resistant Polyethylene bin interior prevents unsightly dents and chips, while eliminating the danger caused from rust and corrosion.
The large easy access door is designed to stay up and out of the way as you scoop ice. The low profile allows convenient access to the deepest part of the bin without a step stool.
Here is a feature you will appreciate more each day. The soft 5/8" rubber bumper on the inside of the bin door seals the bin against heat loss but it also dampens the harsh noise of slamming the door shut.
The bin's 6" NSF approved adjustable legs eliminate drainage problems by making it easy to level the unit on the most uneven floor.
ADVANCED TECHNOLOGY AND RUGGED CONSTRUCTION MAKE ICE-O-MATIC EASIER TO INSTALL AND MAINTAIN THAN EVER BEFORE.
ICE-O-Matic... it's the easiest choice you can make. It is the smart choice for Bars, Restaurants, Hotels, Convenience Stores, Institutions and Health Care Applications. You can purchase ICE-O-Matic with confidence.
Use the "How To Choose Your Ice Maker" page to learn what size ICE-O-Matic fits your need
Produces 506 lbs. of ice per 24 hour cycle at 70°F air and 50°F water, or 366 lbs. of ice per 24 hour cycle at 90°F air and 70°F water.
Operating requirements: Minimum 50°F air, 40°F water, 20 PSIG water pressure; Maximum 110°F air, 100°F water , 60 PSIG water pressure.
Power consumption: 6.5 KWH /100 lbs. Potable water usage: 24.5 gallons /100 lbs.
Bin capacity: 365 lb. application capacity. 270 lb. ARI capacity,
Minimum Clearance for air cooled: 6" for air intake and exhaust
ICE Cube Size and Shape: Full Cube 7/8 x 7/8 x 3/8 inches
* Manufacturer Model #: ICE0400HA / B40PS
Adobe AcrobatICE 0400FH Ice MakerTo download the manufacturer's specifications sheet in Adobe® Acrobat®, click here.
Ice Storege Bin Specification Page
Spec sheets often take a moment to load, please be patient after clicking on the link.
(If you cannot open the file, click here to download a free copy of Acrobat® Reader™.)
Stainless steel exterior with black fingerprint proof molding [ TOP ]
5 Years 3 years parts and labor on all components. ..Plus 2 additonal years parts for compressor.
Extended warranty is available. See detail above.[ TOP ]
Kirby Restaurant Supply is A Commercial Equipment and Supply Business in Longview, Texas, Longview is 60 miles West of Shreveport LA and 120 miles East of Dallas on I - 20 )
Business Hours Are:Monday Through Friday 8AM To 5PM Central Standard Time.
or call / Ask for internet sales.