Moore g-48 precision jig grinder


Subject: Moore g-48 precision jig grinder
Motor Driven With 2 HP DC Motor With Tachometer Feedback For Spindle 2 HP DC Motors With Tachometer Feedback For Traverse. Wire For 3 Phase, 60 Cycle, 440 Volt Operation. With Controls.
Acu-Rite DRO200M 2-Axis DRO. 9,000 RPM Heavy Duty Low Speed Grinding Spindle. (2) 40,000 RPM Grinding Spindles. 60,000 RPM Grinding Spindle. Moore Precise Rotary Table ± 6 Seconds (Serial No. P-2959) With Tailstock Unit. Moore Microsine Table With Micro-Sine Accessories And Mahogany Rolling Storage Cabinet. Heavy Duty Slot Grinding Attachment. Positive Stop. Extension Plates For Internal And External Grinding. 12" X 6" Height Extension Parallels (Set Of Four). 10" X 2" Height Extension Parallels (Set Of Four). 6" Precision Vise. Bijur Spraymist Coolant System. Bijur Automatic Lubrication System. Mahogany Desk Type Cabinet. Miscellaneous Tooling. Manuals And Drawings.
Cross Travel (Spindle Carriage): 24"
Distance between uprights (Bridge Support): 32"
Distance from Table Top to Fixed Bridge: 18.5"
Distance from Wheel Collet to Table Top Maximum: 24.5"
Distance from Wheel Collet to Table Top Minimum: 6"
Main Spindle Speeds (Infinitely Variable): 25-225 RPM
Spindle Feeds (Infinitely Variable) @1" Stroke Setting: 2-120 Cycles
Stroke Length Setting Range: .100 to 5-1/8"
Grinding Wheel Spindle (with appropriate spindle): 8,000 to 175,000 RPM
Grinding Capacity: 1/64" to 10"
Angular Adjustment of Spindle: Up to 11/2° from Centerline
Radial Offset of Grinding Spindle: Coarse Adjustment from behind center to 1/1/8" Beyond Center. Fine Adjustment in increments of .0001" for a distance of .075" anywhere within the full course adjustment range.
Approximate Floor Space for Machine Only: 84" x 132" x 110"H
Approximate Weight: 12,000 lbs