Lincoln ranger 250 lpg(lp gas) welder generator K2336-1


Subject: Lincoln ranger 250 lpg(lp gas) welder generator K2336-1
You can call me at FROM 5:00AM-7:00PM PT, 7 DAYS A WEEK
250 Amp DC LPG Engine Driven Welder
The Ranger 250 LPG is ready for a workout - all day, everyday! Intended for environments where gasoline and diesel emissions are unacceptable. This tough Lincoln LPG fuel welder/generator delivers 250 amps for welding at 100% duty cycle. The Ranger 250 LPG is recommended for stick welding, including a separate, dedicated downhill pipe mode, as well as Touch-Start TIG, flux-cored and MIG wire welding and arc gouging. Lincoln Chopper Technology provides easy starts, an extremely smooth arc, low spatter and outstanding bead appearance. The sleek, enclosed case lowers noise and protects critical engine components. Hot looks, hot features, hot performance - That's the Ranger 250 LPG!
- A powerful 250 amp DC CC/CV LPG engine driven welder. All rated outputs at 100% duty cycle 104F (40C).
- Excellent DC multi-process welding for general purpose stick, downhill pipe (stick) TIG, cored-wire, MIG (CO2 and blended gas) and arc gouging with carbons up to 3/16" in diameter.
- Lincoln's Chopper Technology provides easy starts, a smooth arc, low spatter and excellent bead appearance.
* Plenty of AC Generator Power
- A portable powerhouse - delivers 9,000 peak (8,000 continuous) watts of 120V/240V AC generator power. Enough power to run lights, tools, pump and weld at the same time!
- Three-year Lincoln warranty on welder (engine is warranted separately by the engine manufacturer).
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 1073
Stick TIG MIG Flux-Cored Gouging
LPG Tank Holder Kit $109.00 SOLD SEPERATLY
Precision TIG 185 Ready-Pak 208/230/1/60
Invertec V205-T One-Pak Package 115/230/1/50/60
Recommended Wire Feeder Options
LN-25 w/Contactor and Gas Solenoid
Drive Roll Kit - .068-3/32" (1.7-2.4mm) Cored Wire
Magnum 300 Package 15 ft 035-045
Drive Roll Kit - .035" (0.9mm) Solid Wire
6 Pin Remote Voltage Control Kit
Drive Roll Kit - 1/16" (1.6mm) Cored Wire
Drive Roll Kit - .035" (0.9mm) Solid Wire
Magnum SG Spool Gun, Air-Cooled, 25 ft.
Control Module Input Cable 14-pin MS-type and Lug
Recommended Plasma Cutter Options
Pro-Cut 55 w/25 ft Torch 208/230/460/1/3/60
Rated CC DC Output Amps/Volts/Duty Cycle
Rated CV Output Amps/Volts/Duty Cycle
List fast. Look great. Sell more. Get Andale Lister!
Use the FREE Counters 1 million sellers do - Andale!
Summary of My Selling Policies
Read my policies on my SquareTrade Seal