Lincoln ranger 10000 welder/generator K1419-4


Subject: Lincoln ranger 10000 welder/generator K1419-4
The Ranger 10,000 is the right choice for a general contractor, maintenance team, farmer or home owner looking for a sizable 9,000 continuous watts (10,000 peak) for lights, tools and emergency standby power, mated with an AC/DC stick welder. In addition, the Ranger 10,000 extends your welding capability with basic TIG, MIG and Flux-Cored welding.
Stick TIG MIG Flux-Cored Gouging
• 9,000 watts continuous (10,000 watts peak) AC generator power
for high capacity needs such as a back-up generator, or powering
Pro-Cut® plasma cutters and Invertec® inverter welders , as well
as lights, grinders and other power tools.
• Smooth AC/DC welding output for a broad range of stick electrodes,
such as Lincoln Excalibur™ 7018 (AWS E7018) and
Fleetweld® 5P+ (AWS E6010). Also capable of MIG, Flux-Cored,
• Rated 225 amps/25 volts for AC, 210 amps/25 volts for DC and
200 amps/20 volts for CV. All rated outputs at 100% duty cycle
• Simultaneous welding and auxiliary power loads – For example,
at 125 amps of welding output, you can still power up to
3,950 watts for lights, grinders and other power tools.
• Rugged Reliability – Rangers have been subjected to an extensive
testing program to ensure reliable operation in a wide variety
• Two engine choices – Kohler® and Honda® gasoline. Both are
2 cylinder 4 cycle OHV (overhead valve) air-cooled.
• Easy to Maintain – Engines require an oil change only every
100 hours and every 200 hours for the oil filter.
• Three year Lincoln warranty (engine is warranted separately by
Power Plug Kit (20 amp), Power Plug Kit (15 amp), Full-KVA Power
Plug, GFCI Receptacle Kit (20 amp), Spark Arrester Kit, Canvas
Cover, Hand Moving Undercarriage, Four Wheeled Undercarriage,
All-Terrain Undercarriage, Factory Undercarriage, Small Two
Recommended Wire Feeder Options
K1419-4 Ranger 10,000 (Kohler® OHV Command CH20S Engine)
LN-25, LN-15 Across-The-Arc Wire Feeder, Magnum 350 Innershield®
Gun, Magnum 200 MIG Gun, Magnum Gun Connector Kit
Pro-Torch® PTA-26V TIG Torch, Magnum® Parts Kit, TIG Module,
Control Cable, Arc Start Switch, Docking Kit, Contactor Kit, Control
Cable Extension, Water Valve Kit
Recommended Plasma Cutting Options
Pro-Cut 55, Full KVA Adapter Kit