Juki-lu-1500N series-lockstitch heavy duty walking foot


Subject: Juki-lu-1500N series-lockstitch heavy duty walking foot
JUKI-LU-1500N Series-Lockstitch Heavy Duty Walking Foot
LU-1508NH (for extra heavy materials)
* Needle Feed And Walking Foot
* New Rectangular Feed Prevents Gathering
* Includes Table, Stand, And Motor
* Handles Heavyweight Materials
* New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
* Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
* Compared with elliptical feed, rectangular feed helps reduce gathered stitches
* With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
* Well tensed seams are consistently produced without pitch errors
* With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
* Stitch length can be easily selected by the stitch dial
* Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large handwheel
* Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
* Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
* Alternating vertical movement mechanism prevents irregular stitches
* Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
* If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
* Pressing the reset button will immediately return the machine back to the normal state
* Maximum stitch length: 9 mm
* Alternating vertical movement: 2.5 mm - 6.5 mm
* Thread take-up: slide type
* Hook: Vertical-axis, double-capacity hook
* The LU1508 has replaced the LU-563 and the LU-563N LU-1560N Double-needle1/4" Gauge , Unison-feed, Lockstitch Machine with a Vertical-axis Large Hooks (with automatic lubricating mechanism).
* 2-needle type machine 1/4" guage between needles
* Delivers the basic functions and performance best suited to the sewing of heavy-weight materials
* Automatic lubricating mechanism improves maintainability
* The sub oil pan and double filter prevents dust from entering the oil.
* Knee-lifter mechanism is built in
* Stitch length can be easily selected by the stitch dial
* Extra large vertical axis hooks
* The machine is full open type top design for easy maintenance and adjustment
Spec Brands appreciates your business.
List fast. Look great. Sell more. Get Andale Lister!
Use the FREE Counters 1 million sellers do - Andale!
Summary of My Selling Policies
ATTENTION ! Electrical Requirements ! All our products are offered in 110V USA standard and special adaptor and/or voltage converter will probably required in other countries.Do not plug straight into a outlet without checking the manufacturer's instructions.
The warranty does not cover damage due to improper installation, power surges or connection to incorrect voltage.
Read my policies on my SquareTrade Seal