Dallas cabinet air feed STR8NER mdl D200-18X18 #2213


Subject: Dallas cabinet air feed STR8NER mdl D200-18X18 #2213
Stock width (with special grippers): Minimum 5.82 in. to Maximum 18 in.
Maximum stock thickness: .090 in. x 18 in. wide
Maximum stock thickness thru straightener: .060 in. x 18 in. wide
Minimum stock thickness: .023 in.
Maximum strokes: 70 per minute x 18 in. long
Feed stroke length accuracy Plus or Minus: .001
Outboard hand wheel on stroke length adjustment.
T Handle wrench fixed to adjusting screw clamping block.
Large diameter stroke adjusting screw.
Limit switches with 15 foot cords.
Feed is ruggedly constructed. It has a high pressure pneumatic gripper head
that grips material, advancing it by cycling between one fixed and one easily
adjusted solid hardened steel stop. An air cushion built into the gripper
brings material to a controlled stop for accurate positioning. Prior to
gripper releasing material, a pneumatic retainer head with hardened anvils
clamps the stock, permitting gripper to return for another stroke.
Interlocking actions between gripper and retainer are maintained by a pressure
sequence valve assuring consistent feeding. A limit switch is supplied and is
to be mounted on the press for control of feeding cycle.
When feeding piloted dies, material is momentarily released during pilot pin
entry. A second limit switch is furnished for this operation and is to be
Email us at
Call our Sales Team @
Web Site and Full Inventory: www.pressesforindustry.com
Summary of our selling policies:
Prices do not include any federal, state, or local taxes, which are in addition to the purchase price and must be paid by Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes PFI with a tax
exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of PFI, be added to the quoted purchase price and invoiced by PFI to Purchaser. The failure of PFI to invoice such taxes does not excuse the Purchaser from responsibility for paying same.
Purchaser agrees that its acceptance of the machinery or equipment tendered shall constitute an acknowledgment by Purchaser that such merchandise or equipment satisfies any and all obligations of PFI hereunder. Purchaser may not revoke its acceptance for any reason whatsoever, provided, however, that if a return privilege is
Web Site and Full Inventory: www.pressesforindustry.com