Chiron 3-axis cnc vertical machining center


Subject: Chiron 3-axis cnc vertical machining center
Serial # 109-67 New 8/1991 Model # FZ12W
Machine Uses Only Chiron Type Tool Holders
GE Fanuc Series O-M CNC Control
26" x 37" Table that Indexes 180 Degrees
(2) Table Work Areas 13-3/4" x 26" Each Position
Table Work Area has a 2" x 2" Matrix of 5/8" Diameter Tapped & Reamed Holes for
Distance Spindle Nose to Table Top: 8.21" Minimum, 24.21" Maximum
Centerline of Spindle to Vertical Way Covers: 12.4"
Distance Floor to Table Top: Approx. 33.8"
Spindle Speeds: 20 to 6000 RPM
Tool Change Time: Approx. 1 Second
Chip to Chip Time: Approx. 3.2 Seconds
Axis Drive Motors: 5 HP on X & Y, 10 HP on Z Axis
12-Position Tool Changer with (12) Assorted Tool Holders
Fibrotakt Indexing Type Table with Hydraulic Dampening
Ways are Preloaded Linear Rolling Guide Type
Cutter Diameter and Tool Length Compensation
Table is Stationary Head Moves in 3 Axis
Fully Enclosed Work Area Guarding with Sliding Access Doors
Electrical Schematics and Programming Manuals
Separate Coolant Pump and Pan System
Overall Size Machine: 66" L-R x 131" F-B x 99" H with Head Up x 7,000 Lbs.
Coolant System: 26" x 22" x 18" H
Wired for 3 Phase, 50/60 Hz, 460 Volts.