Up
|
CHEVALIER 3 AXIS CNC BED TYPE MILLING MACHINE This machine is in New Condition, it was only used a few times!!! Overall dimension ................................................. 10" x 54" T-Slots (3) .............................................................. 22" T-Slot size .............................................................. 0.63" (16mm) Longitudinal travel ................................................. 30" Cross travel ........................................................... 18" Head travel ............................................................ 22" Quill travel .............................................................. 5" Spindle motor (A5 and N5 models) .................... 5 HP Spindle nose taper (A5 and N5 models) ............ NST 40 Spindle speeds A5/N5: ........................................ 80-4000rpm Spindle center to column ...................................... 18" Spindle nose to table ............................................ 26" Quill diameter (NST 40) ........................................ 4.13" Traverse rate X & Y axis ....................................... 300 ipm Traverse rate Z axis .............................................. 300 ipm Feed rates X, Y & Z axes ..................................... 0.1 ~ 150 ipm Positioning accuracy ............................................ +/- 0.0005" Positioning repeatability ...................................... +/- 0.0002" Resolution (closed loop optical encoder) .......... 0.0001" Table load capacity .............................................. 1210 lbs. Floor area - doors open (L x W x H) ................... 81" x 70" x 93" Weight (net) ........................................................... 4158 lbs. Electrical supply 60 hertz 3 phase ....................... 220/440V Air (for power drawbar) ......................................... 80 psi, 3-5 cfm - Rubber way covers, front and rear - Operation, parts and programming manuals - +/-0.0002" repeatability, +/- 0.0005" positioning accuracy - 30" x 18" x 22" (X, Y, Z axis) travels - Anilam 3300MK control with easy program conversational language - Fanuc OMD control with G-code programming with back ground editing - C4 grade 1" ball screws on all three axes - Class P4 ball screw support bearings - Rigid, honeycomb ribbed, Meehanite casting - Square type column and saddle ways - 300 imp rapid traverse rate (X & Y axis) - 10" x 54" table with 1,210 lbs. workload capacity - Automatic lube system with alarm and gauge ANILAM 3300M CONTROL FEATURES: - 3.5" floppy disk and 1.44 MB hard disk drives - Easy to use machinists programming language - Real time graphics and simulation graphics - RS-232 communications, format floppy disk - Rotate, mirror image, scaling, sub-programs, repeat loops - Part program storage memory: 1.6GB - RS-232 and auto cassette interface ports - Absolute and incremental programming - Canned cycles, sub-routines, repeat cycles, rotation, part scaling, mirror imaging & cavity mill cycle - Tool table with diameter and length offsets (2) ETM SHELL MILL HOLDERS (1) DRILL CHUCK WITH ETM ADAPTER This machine is in New Condition, it was only used a few times!!! Supplying Quality Machinery and Tooling for Over 55 Years!! Member: Machinery Dealers National Association Hours of Operation: Monday - Thursday 9 a.m. to 5 p.m. - Friday - 9 a.m. to 4 p.m. 1311 South Ponca Street - Baltimore, Maryland 21224 Phone or - Fax |