#9159 - ex-cello model 36 form grinder

UpUp


Subject: #9159 - ex-cello model 36 form grinder
EX-CELLO MODEL 36 FORM GRINDER
Maximum diameter work ground with 18" wheel 8"
Maximum diameter work ground with 14" wheel 12"
Maximum diameter swing over table 19"
Maximum diameter work inserted through work spndle 3"
Maximum work length between centers 48"
Maximum threaded portion of work, from headstock center 36"
Minimum grinding wheel diameter 13"
Work spindle speeds, maximum 400 RPM
Threads per Inch obtainable with standard gears 1 to 128
Maximum lead obtainable with special gears 12"
Maximum helix setting, right or left 45 Deg.
Lead control, maximum per foot .020"
Wheel feed, on work diameter (per pass) .001" to .030"
Automatic wheel feed, maximum on work dia.(total) .165"
Dresser feed, on wheel diameter .0004" to .010"
To suit special applications 5 to 25 HP, 1800 RPM
Hydraulic pump motor 3 HP, 1200 RPM
Coolant pump motor 3/4 HP, 3600 RPM
Dresser motor 1/10 HP, 1800 RPM
Lubricator motor 1/10 HP, 1800 RPM
Coolant tank capacity 100 Gal.
Coolant pump capacity(approx.) 3/4 HP
Hydraulic reservoir capacity 20 Gal.
Right hand & left hand threading