Up
|
10" x 24"cc CINCINNATI Universal Cylindrical Grinding Machine Equipped With Swing Down Internal Grinding Attachment, S/N 4U2B5R-34 (New 1965) Maximum diameter machine will grind with 12" Minimum diameter of grinding wheel Minimum diameter of grinding wheel for grinding 0" diameter of work between centers work held in chuck Nominal distance between centers Swivel table graduated to an angle of Swivel table graduated taper per foot Distance between inner edge of wheel and front Swivel range, lower swivel, right and left upper swivel, right and left Headstock and footstock center taper Number of work rotation speeds Headstock spindle nose, American Standard, size Headstock swivel range, toward wheelhead away from wheelhead Number of table traverse speeds Range of table traverse speeds Table tarry adjustment-infinite Mechanical hand table traverse-rate per revolution (slow) Minimum/Maximum automatic infeed at table Minimum movement necessary to reverse the table Wheelhead movement per revolution of infeed handwheel (diameter reduction) Wheelhead movement per revolution of infeed handwheel through index mechanism Swing-down internal grinding attachment with spindle and 6" diameter four-jaw chuck Push button dual rate automatic and electro-hydraulic operated infeed (rapid advance of wheelhead, coarse feed, fine feed, spark-out to size, and rapid wheelhead retraction). Includes mechanism for automatic starting and stopping of cutting fluid and headstock rotation. Universal motorized workhead with combination live and dead spindle (2) 1/8"-2" Capacity back rests (1) 1/2"-3" Capacity center rest Footstock-mounted wheel dresser 1/4 H.P. 3/60/220-440 volt external coolant pump and tank 3/4 H.P. 3/60/220-440 volt headstock motor 1 H.P. 3/60/220-440 volt hydraulic pump motor 1 H.P. 3/60/220-440 volt internal grinding spindle motor 3 H.P. 3/60/220-440 volt wheelhead motor Free-standing electrical control cabinet Machine is wired for 440 volt operation. (F.O.B. Truck, Hauppauge - Long Island, NY) |